Skip to content Skip to navigation menu
7200-PJD Light Series Duplex Ball Bearing

7211PJDU

7200-PJD Light Series Duplex Ball Bearing
Item #102137943
  • Single Row Angular Contact Bearing, 55 mm ID x 100 mm OD x 21 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
7200-PJD Light Series Duplex Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Single Row Angular Contact Bearing, 55 mm ID x 100 mm OD x 21 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Fillet Radius 1.5 mm
icNumber 7695855
Precision Level Standard (ABEC 1)
Internal Design Universal Mounting
Seal Material None
Radial Internal Clearance Normal
Precision Standard
Enclosure Open
Cage Material Brass/Bronze
Preload Level None
Series 7200PJ
Bore Type Round Bore
Flush Ground Yes
Dynamic Load Rating 11000 lbf
Locking Device No Locking Device
Snap Ring No Snap Ring
Inner Ring Width 21 mm
Material Steel
O.D. Type Straight
Ball Material Steel
O.D. 100 mm
I.D. 55 mm
Limiting Speed - Oil 7800 rpm
Inch/Metric Metric Bore
Capacity Standard Capacity
Bearing Type Angular Contact
Radial Internal Clearance Specification Normal Clearance
Contact Angle 40°
Seal Type Unsealed
Temperature Range [Max] 450 °F
Lubricant Oil Preservative
Cage Type Metal
Limiting Speed - Grease 6000 rpm
No. in Set Single Bearing
Static Load Rating 38 kN
Static Load Rating [Max] 8430 lbf
Outer Ring Width 21 mm
Origin Single Row Angular Contact
Rows of Balls Single
Width 21.000 mm
Weight 1.448 LB
EAN or UPC 97741016605
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison