Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Width | 1 in |
| Mounted Unit Duty | Heavy-Duty |
| Inch/Metric | Inch |
| Length Through Bore | 1.96875 in |
| Bearing Design | Non-Expansion |
| Bolt Hole Length | 5/8 in |
| Seal Type | Contact Seals |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Collar No. | SN103K |
| Shaft Dia. | 1.1875 in |
| Locking Device | Eccentric Locking Collar |
| Base Height | 7/8 in |
| End Type | Open End |
| Base Width | 2 3/8 in |
| Series | RSAO Series |
| Housing Material | Cast Iron |
| Collar O.D. | 1 15/16 in |
| Bolt Size | 1/2 in |
| Housing Height | 4 1/4 in |
| Base Length | 8 1/4 in |
| Housing Construction | 1 Piece |
| Bearing Insert | GN103KRRB |
| Bolt Hole Spacing | 6 5/8 in |
| Bolt Holes | 2 |
| Overall Width | 2 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Housing Width | 3 3/4 in |
| Weight | 6.602 LB |
| EAN or UPC | 87796058156 |
