Find a Service Center
Alternate Products
- 1.1875" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Overall Width | 2 3/8 in |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Bolt Size | 1/2 in |
| Bolt Hole Width | 1 in |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Holes | 2 |
| Seal Type | Contact Seals |
| Base Width | 2 3/8 in |
| Inch/Metric | Inch |
| Housing Construction | 1 Piece |
| Collar O.D. | 1 15/16 in |
| Shaft Dia. | 1.1875 in |
| Base Length | 8 1/4 in |
| Base Height | 7/8 in |
| Length Through Bore | 1.96875 in |
| Bolt Hole Spacing | 6 5/8 in |
| Bolt Hole Length | 5/8 in |
| Bearing Insert | GN103KRRB |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Collar No. | SN103K |
| Lubrication | Relubricatable |
| Series | RSAO Series |
| Insert Type | Steel Insert |
| Housing Width | 3 3/4 in |
| End Type | Open End |
| Housing Height | 4 1/4 in |
| Weight | 6.602 LB |
| EAN or UPC | 87796058156 |
