Find a Service Center
Alternate Products
- 1.6875" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Holes | 2 |
| Length Through Bore | 2.3125 in |
| Base Length | 11 3/8 in |
| Collar No. | SN111K |
| Bolt Size | 5/8 in |
| Base Width | 3 1/8 in |
| Housing Height | 5 5/8 in |
| Collar O.D. | 2 3/4 in |
| Bolt Hole Width | 1 1/8 in |
| Bearing Type | Ball Bearing |
| Insert Type | Steel Insert |
| Base Height | 1 3/16 in |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Heavy-Duty |
| Seal Type | Contact Seals |
| Overall Width | 3 1/8 in |
| Inch/Metric | Inch |
| Housing Width | 5 in |
| Bolt Hole Length | 3/4 in |
| Series | RSAO Series |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Shaft Dia. | 1.6875 in |
| Lubrication | Relubricatable |
| Bearing Insert | GN111KRRB |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 9 in |
| Weight | 14.718 LB |
| EAN or UPC | 87796060050 |
