Find a Service Center
- 1.6875" Shaft, 3.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Series | LSAO Series |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 9 in |
| Bolt Hole Width | 1 1/8 in |
| Bolt Size | 5/8 in |
| Housing Material | Cast Iron |
| Bearing Insert | GN111KRRB |
| Bolt Hole Length | 3/4 in |
| Shaft Dia. | 1.6875 in |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 350 °F |
| Overall Width | 3 1/8 in |
| Base Width | 3 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 2.3125 in |
| Collar O.D. | 2 3/4 in |
| Bearing Design | Non-Expansion |
| Base Length | 11 3/8 in |
| Seal Type | Labyrinth Seals |
| Housing Width | 5 in |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Bolt Holes | 2 |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Base Height | 1 3/16 in |
| Housing Height | 5 5/8 in |
| Insert Type | Steel Insert |
| Collar No. | SN111K |
| Weight | 14.86 LB |
| EAN or UPC | 87796059924 |
