Find a Service Center
Alternate Products
- 1.6875" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Type | Ball Bearing |
| Collar O.D. | 2 3/4 in |
| Bolt Holes | 2 |
| Collar No. | SN111K |
| Length Through Bore | 2.3125 in |
| Mounted Unit Duty | Heavy-Duty |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 9 in |
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | GN111KRRB |
| Base Length | 11 3/8 in |
| Overall Width | 3 1/8 in |
| Seal Type | Contact Seals |
| Bolt Hole Length | 3/4 in |
| Shaft Dia. | 1.6875 in |
| Locking Device | Eccentric Locking Collar |
| Series | RSAO Series |
| Inch/Metric | Inch |
| Base Height | 1 3/16 in |
| Housing Width | 5 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Base Width | 3 1/8 in |
| Housing Height | 5 5/8 in |
| Bolt Size | 5/8 in |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Bolt Hole Width | 1 1/8 in |
| Insert Type | Steel Insert |
| Weight | 14.718 LB |
| EAN or UPC | 87796060050 |
