Find a Service Center
Alternate Products
- 60 mm ID x 130 mm OD x 31 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Bore Type | Cylindrical |
| Limiting Speed - Grease | 4500 rpm |
| Bearing Design | w/ Smaller Axial Internal Clearance |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Inner Ring Width | 1.22 in, 31 mm |
| I.D. | 2.36 in, 60 mm |
| Cage Type | Plastic |
| Snap Ring | No Snap Ring |
| O.D. | 5.12 in, 130 mm |
| Ball Material | Steel |
| Contact Angle | 40 Degree |
| Limiting Speed - Oil | 6000 rpm |
| No. in Set | Single Bearing |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Flush Ground | No |
| Rows of Balls | Single |
| Material | Bearing Steel |
| Series | 7300 |
| Width | 1.22 in, 31 mm |
| Capacity | High Capacity |
| Outer Ring Width | 1.22 in, 31 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Cylindrical |
| Preload Level | Small Axial Clearance |
| icNumber | 7695835 |
| Cage Material | Polyamide |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Open |
| Seal Material | None |
| Locking Device | No Locking Device |
| Inch/Metric | Metric |
| Bearing Type | Unmounted, Angular Contact |
| Weight | 3.827 LB |
| EAN or UPC | 7316577610638 |
