These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
No Connector
Function
3-Position Detented
Spool Code
2
Spool Spring Arrangement Code
N
Solenoid Code
B
Electrical Connector Code
None
Solenoid
Double
Mechanical Options
None
Reducer Module
N/A
Solenoid Energization Code
None
Surge Suppressor/Damper
None
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Overrides
No Overrides
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Function Code
2
EN Code
None
Design No.
60
Operation
Solenoid Operated
AC/DC
AC
Indicator Lights
No
Actuator Type
Solenoid
Coil Rating Code
B
Valve Type
High-Performance
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Port Restrictor Plug Code
None
Housing Code
W
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Electrical Options
None
Manual Override Option Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Crossover
All Ports Blocked
Coil Type Code
F
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper Code
None
Spool Indicator Switch Code
None
Center Position
All Ports Blocked
Cycle Rate [Max]
N/A
Solenoid Indicator Lights Code
None
Port T Code
6
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
