These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Housing Code
W
Spool Indicator Switch Code
None
Reducer Module
N/A
Coil Type Code
F
Port Restrictor Plug Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid
Double
Pressure [Max]
5075 psi
Spool Code
2
Electrical Options
None
Solenoid Indicator Lights Code
None
Function
3-Position Detented
Rated Flow [Max]
21 gal/min
Electrical Connection
No Connector
Coil Rating Code
B
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Spool Spring Arrangement Code
N
Crossover
All Ports Blocked
Solenoid Energization Code
None
Electrical Connector Code
None
Overrides
No Overrides
Design No.
60
Center Position
All Ports Blocked
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
AC/DC
AC
Response Type
Standard Response
Operation
Solenoid Operated
Port T Code
6
Solenoid Code
B
Port Restrictor Plugs
None
NFPA Size
D03
Mechanical Options
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Surge Suppressor/Damper
None
EN Code
None
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Function Code
2
Cycle Rate [Max]
N/A
Indicator Lights
No
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
