These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Indicator Lights
No
Port T Code
6
Port Restrictor Plug Code
None
Electrical Connection
DIN 43650
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
Function Code
2
Surge Suppressor/Damper
None
Coil Type
DIN 43650
Coil Rating Code
B
Operation
Solenoid Operated
NFPA Size
D03
Solenoid Indicator Lights Code
None
Port T Pressure Rating
3000 psi
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Spool Shift Timing
N/A
Pressure Port Check Valve Pressure
N/A
AC/DC
AC
Electrical Options
None
Spool Indicator Switch Code
None
Center Position
All Ports Blocked
Overrides
No Overrides
Solenoid
Single
Spool Code
2
Solenoid Energization Code
None
Seal Material
Buna-N
Response Type
Standard Response
Pilot/Drain
None
Crossover
All Ports Blocked
Design No.
60
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Solenoid Code
B
Coil Type Code
U
Housing Code
None
Valve Type
High-Performance
Manual Override Option Code
H
Spool Spring Arrangement Code
A
EN Code
None
Port Restrictor Plugs
None
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
