These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to End
Indicator Lights
No
Surge Suppressor/Damper Code
None
Electrical Options
None
AC/DC
AC
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Coil Rating Code
B
Coil Type Code
U
Seal Material
Buna-N
Design No.
60
Overrides
No Overrides
Coil Type
DIN 43650
Voltage & Frequency
110/120 VAC – 50/60 Hz
Cycle Rate [Max]
N/A
Spool Code
2
Reducer Module
N/A
Spool Spring Arrangement Code
A
Port T Code
6
Electrical Connector Code
None
Response Type
Standard Response
Pressure [Max]
5075 psi
Function Code
2
Pilot Valve Type
N/A
Actuator Type
Solenoid
Pilot/Drain
None
Port Restrictor Plugs
None
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Solenoid Code
B
Solenoid Energization Code
None
Electrical Connection
DIN 43650
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Solenoid
Single
Spool Shift Timing
N/A
Surge Suppressor/Damper
None
EN Code
None
Operation
Solenoid Operated
Housing Code
None
NFPA Size
D03
Manual Override Option Code
H
Crossover
All Ports Blocked
Spool Indicator Switch Code
None
Valve Type
High-Performance
Center Position
All Ports Blocked
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
