These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Coil Type Code
U
Spool Spring Arrangement Code
BL
Coil Type
DIN 43650
EN Code
None
Voltage & Frequency
24 VDC
Design No.
60
Spool Code
2
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Response Type
Standard Response
Coil Rating Code
H
Pressure [Max]
5075 psi
Manual Override Option Code
None
Function Code
2
Electrical Connector Code
None
Operation
Solenoid Operated
Valve Type
High-Performance
Indicator Lights
No
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
Function
2-Position Spring Offset, End to Center
Overrides
No Overrides
Actuator Type
Solenoid
Crossover
All Ports Blocked
Cycle Rate [Max]
N/A
Solenoid
Single
Surge Suppressor/Damper Code
None
Electrical Options
None
AC/DC
DC
NFPA Size
D03
Electrical Connection
DIN 43650
Port T Code
7
Center Position
All Ports Blocked
Solenoid Code
H
Solenoid Energization Code
None
Pilot/Drain
None
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Mechanical Options
None
Port Restrictor Plug Code
None
Reducer Module
N/A
Port Restrictor Plugs
None
Housing Code
None
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
