These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Manual Override Option Code
None
Actuator Type
Solenoid
Spool Code
2
Valve Type
High-Performance
Port T Code
7
Pilot Valve Type
N/A
Electrical Connector Code
None
Coil Type Code
U
Spool Spring Arrangement Code
BL
Response Type
Standard Response
Design No.
60
Function Code
2
AC/DC
DC
Function
2-Position Spring Offset, End to Center
Electrical Options
None
EN Code
None
Rated Flow [Max]
21 gal/min
Housing Code
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Mechanical Options
None
Surge Suppressor/Damper Code
None
Solenoid Indicator Lights Code
None
Electrical Connection
DIN 43650
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Solenoid
Single
Coil Rating Code
H
Solenoid Code
H
Port Restrictor Plugs
None
Reducer Module
N/A
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Indicator Lights
No
Voltage & Frequency
24 VDC
Spool Indicator Switch Code
None
Center Position
All Ports Blocked
Surge Suppressor/Damper
None
Crossover
All Ports Blocked
Overrides
No Overrides
NFPA Size
D03
Coil Type
DIN 43650
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
