868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Port Drained Into	Tank Port
Valve Mount Type	Subplate/Manifold Mounted
Interface	D05
Pressure Adjustment Range (psi)	60 to 725
Pressure Adjustment Range, Dual (psi)	N/A
External Drain, Dual	N/A
Pressure Limited In, Dual	N/A
Pressure [Max]	4500 psi
Relief Function	Single
Design No.	30
Flow [Max]	32 gal/min
Temperature Range [Min]	32 °F
Gauge Port Thread Type	SAE
Manufacturer Part No.	DGMC-5-PT-AW-S-30
No. of Stages	Single Stage
Body Material	Cast Iron
Leakage	Standard
Compatible Fluids	Petroleum Oil
Fluid Cleanliness	20/18/15 micron
Adjustment Type	Screw
Seal Material	Buna-N
Adjustment Type, Dual	N/A
Pressure Limited In	Pressure Port
Model No.	DGMC-5-PT-AW-S-30
Family Name	Vickers D05 SystemStak™ Valves
Temperature Range [Max]	176 °F
Actuation Option	Proportional
Gage Port	SAE-4
Remote Control Port	No
Operating Pressure [Max]	4500 psi
Performance	Standard Performance
Valve Type	Relief Valve "P" to "T"
Adjustment	Yes
External Drain	No
Port Drained Into, Dual	N/A
Weight	6.5 LB