868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Pressure Adjustment Range (psi)	60 to 725
Fluid Cleanliness	20/18/15 micron
Gauge Port Thread Type	SAE
Flow [Max]	32 gal/min
Body Material	Cast Iron
Design No.	30
Valve Mount Type	Subplate/Manifold Mounted
No. of Stages	Single Stage
Seal Material	Buna-N
Valve Type	Relief Valve "P" to "T"
Pressure Limited In	Pressure Port
External Drain	No
Adjustment Type, Dual	N/A
Family Name	Vickers D05 SystemStak™ Valves
Pressure Adjustment Range, Dual (psi)	N/A
Relief Function	Single
Leakage	Standard
Interface	D05
Temperature Range [Max]	176 °F
Port Drained Into	Tank Port
Pressure [Max]	4500 psi
Performance	Standard Performance
Actuation Option	Proportional
Operating Pressure [Max]	4500 psi
External Drain, Dual	N/A
Adjustment Type	Screw
Temperature Range [Min]	32 °F
Adjustment	Yes
Compatible Fluids	Petroleum Oil
Model No.	DGMC-5-PT-AW-S-30
Remote Control Port	No
Pressure Limited In, Dual	N/A
Port Drained Into, Dual	N/A
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Gage Port	SAE-4
Weight	6.5 LB