These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function Code
2
Indicator Lights
No
Response Type
Standard Response
Electrical Connection
DIN 43650
Port Restrictor Plug Code
None
Center Position
All Ports Blocked
Port T Pressure Rating
3000 psi
Voltage & Frequency
24 VDC
Solenoid Indicator Lights Code
None
NFPA Size
D03
Solenoid Code
H
Pressure Port Check Valve Pressure
N/A
Pilot/Drain
None
Cycle Rate [Max]
N/A
Pilot Valve Type
N/A
Crossover
All Ports Blocked
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Housing Code
None
Operation
Solenoid Operated
EN Code
None
Reducer Module
N/A
Valve Type
High-Performance
Coil Type Code
U
Pressure [Max]
5075 psi
Electrical Options
None
Coil Type
DIN 43650
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to End
Solenoid
Single
Solenoid Energization Code
None
Spool Spring Arrangement Code
AL
Overrides
No Overrides
Spool Code
2
Manual Override Option Code
None
AC/DC
DC
Seal Material
Buna-N
Spool Shift Timing
N/A
Design No.
60
Actuator Type
Solenoid
Coil Rating Code
H
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Electrical Connector Code
None
Port T Code
7
Weight
3.519 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
