These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Pressure [Max]
5075 psi
Spool Spring Arrangement Code
AL
Solenoid Code
H
Manual Override Option Code
None
Port T Pressure Rating
3000 psi
Coil Type Code
U
Port Restrictor Plugs
None
Port T Code
7
Surge Suppressor/Damper
None
Mechanical Options
None
Valve Type
High-Performance
Coil Type
DIN 43650
Reducer Module
N/A
Coil Rating Code
H
Surge Suppressor/Damper Code
None
Spool Code
2
Voltage & Frequency
24 VDC
Response Type
Standard Response
Solenoid
Single
Indicator Lights
No
Solenoid Indicator Lights Code
None
Electrical Connection
DIN 43650
Port Restrictor Plug Code
None
Solenoid Energization Code
None
Housing Code
None
AC/DC
DC
Pilot Valve Type
N/A
Crossover
All Ports Blocked
Pilot/Drain
None
Seal Material
Buna-N
Overrides
No Overrides
Electrical Connector Code
None
Operation
Solenoid Operated
Center Position
All Ports Blocked
Design No.
60
Cycle Rate [Max]
N/A
EN Code
None
Function Code
2
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Electrical Options
None
Function
2-Position Spring Offset, End to End
Spool Shift Timing
N/A
Spool Indicator Switch Code
None
Weight
3.519 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
