These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connector Code
None
Manual Override Option Code
None
Spool Code
2
Response Type
Standard Response
Pilot/Drain
None
Port T Code
6
Coil Type
DIN 43650
Surge Suppressor/Damper Code
None
EN Code
None
Solenoid
Single
Spool Spring Arrangement Code
A
Design No.
60
NFPA Size
D03
Valve Type
High-Performance
Reducer Module
N/A
Electrical Options
None
Port T Pressure Rating
3000 psi
Electrical Connection
DIN 43650
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Voltage & Frequency
220/240 VAC – 50/60 Hz
Function
2-Position Spring Offset, End to End
Pilot Valve Type
N/A
Mechanical Options
None
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Coil Type Code
U
Indicator Lights
No
Center Position
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Blocked
Overrides
No Overrides
Solenoid Indicator Lights Code
None
Cycle Rate [Max]
N/A
Solenoid Code
D
AC/DC
AC
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Coil Rating Code
D
Rated Flow [Max]
21 gal/min
Housing Code
None
Seal Material
Buna-N
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Function Code
2
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
