These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
Valve Type
High-Performance
Port T Code
6
Port T Pressure Rating
3000 psi
Coil Type Code
U
Solenoid Energization Code
None
Center Position
All Ports Blocked
AC/DC
AC
Pilot/Drain
None
Spool Shift Timing
N/A
Voltage & Frequency
220/240 VAC – 50/60 Hz
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
A
Solenoid
Single
Indicator Lights
No
Function
2-Position Spring Offset, End to End
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Function Code
2
Operation
Solenoid Operated
Reducer Module
N/A
Coil Type
DIN 43650
Actuator Type
Solenoid
Design No.
60
Pressure [Max]
5075 psi
Seal Material
Buna-N
Electrical Connector Code
None
Electrical Connection
DIN 43650
Solenoid Indicator Lights Code
None
Overrides
No Overrides
Response Type
Standard Response
Spool Indicator Switch Code
None
Coil Rating Code
D
Crossover
All Ports Blocked
EN Code
None
Housing Code
None
Mechanical Options
None
Spool Code
2
Pilot Valve Type
N/A
Solenoid Code
D
Pressure Port Check Valve Pressure
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
