DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Coil Rating Code
B
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
Reducer Module
N/A
Electrical Options Code
None
Operation
Pilot Operated
Overrides
Plain Override Solenoid Ends
Indicator Lights
Yes
EN Code
None
Pilot Pressure Code
E
Crossover
All Ports Open
Response Type Code
None
Center Position
All Ports Open
Spool Spring Arrangement Code
C
Coil Type Code
F
Port Restrictor Plug Code
None
Pilot/Drain
External Pilot/External Drain
Mechanical Options Code
None
Solenoid Energization Code
None
Pressure Port Check Valve Code
None
Housing Code
W
Manual Override Option Code
None
Valve Type
Standard-Duty
Seal Material
Buna-N
AC/DC
AC
Design No.
10
Pilot Valve Type Code
S
Gauge Ports Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot Drain Code
None
Reducer Module Code
None
Solenoid
Double
Electrical Connector Code
PA5
Function
3-Position Spring Centered
Rated Flow [Max]
185 gal/min
Mechanical Options
None
Response Type
Standard Response
Pressure [Max]
5000 psi
Gauge Port
SAE-4
Solenoid Indicator Lights Code
L
Pilot Valve Type
CETOP 3, Standard Performance
Spool Control Modification Code
None
NFPA Size
D08
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Spool Code
0
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Electrical Connection
Five Pin Connector
Surge Suppressor/Damper
None
Port T Pressure Rating
5000 psi
Port Restrictor Plugs
None
Electrical Options
None
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
