DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Response Type Code
None
Gauge Ports Code
None
Spool Spring Arrangement Code
C
Electrical Options Code
None
Housing Code
W
Actuator Type
Solenoid
Reducer Module
N/A
Spool Code
0
Response Type
Standard Response
Pilot Drain Code
None
Spool Indicator Switch Code
None
Pilot Pressure Code
E
Mechanical Options Code
None
Spool Control Modification Code
None
Mechanical Options
None
Electrical Options
None
Solenoid
Double
Electrical Connector Code
PA5
Pilot Valve Type
CETOP 3, Standard Performance
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Reducer Module Code
None
Pilot/Drain
External Pilot/External Drain
AC/DC
AC
Port T Pressure Rating
5000 psi
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type Code
S
Port Restrictor Plugs
None
Pressure [Max]
5000 psi
Seal Material
Buna-N
Crossover
All Ports Open
Design No.
10
Solenoid Energization Code
None
Center Position
All Ports Open
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Code
None
Manual Override Option Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Operation
Pilot Operated
Electrical Connection
Five Pin Connector
Coil Type Code
F
Overrides
Plain Override Solenoid Ends
Pressure Port Check Valve Pressure
N/A
EN Code
None
Coil Rating Code
B
NFPA Size
D08
Function
3-Position Spring Centered
Gauge Port
SAE-4
Indicator Lights
Yes
Valve Type
Standard-Duty
Rated Flow [Max]
185 gal/min
Solenoid Indicator Lights Code
L
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
