Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mechanical Options Code | None |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Crossover | All Ports Blocked |
| Model No. | DG4S4-012A-U-C-60 |
| Surge Suppressor/Damper | None |
| Pressure [Max] | 3600 psi |
| Solenoid | Single |
| Response Type | Standard Response |
| Electrical Options | None |
| Electrical Options Code | None |
| Coil Type Code | U |
| Coil Rating Code | C |
| Port T Pressure Rating | 1000 psi |
| Reducer Module | N/A |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Function | 2-Position Spring Offset |
| Pilot Valve Type | N/A |
| Indicator Lights | No |
| Spool Spring Arrangement Code | A |
| Electrical Connection | DIN 43650 |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Port Restrictor Plugs | None |
| Design No. | 60 |
| Actuator Type | Solenoid |
| Spool Code | 2 |
| Mechanical Options | None |
| Rated Flow [Max] | 25 gal/min |
| Tank Port Rating | 1000 |
| Pilot/Drain | None |
| Operation | Solenoid Operated |
| Center Position | All Ports Blocked |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| NFPA Size | D05 |
| Valve Type | Standard-Duty |
| Seal Material | Buna-N |
| Weight | 10.0 LB |
