These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
W
Solenoid Energization Code
None
Spool Code
0
Port Restrictor Plugs
None
Response Type
Standard Response
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
EN Code
None
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Solenoid Indicator Lights Code
L
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
AC/DC
DC
Pressure [Max]
5075 psi
Electrical Connector Code
PA5
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Function Code
0
Coil Rating Code
H
Port T Code
7
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Electrical Connection
Five Pin Connector
Electrical Options
None
Operation
Solenoid Operated
NFPA Size
D03
Overrides
No Overrides
Indicator Lights
Yes
Cycle Rate [Max]
N/A
Design No.
60
Coil Type Code
F
Voltage & Frequency
24 VDC
Seal Material
Buna-N
Crossover
All Ports Open
Actuator Type
Solenoid
Solenoid Code
H
Mechanical Options
None
Solenoid
Double
Spool Indicator Switch Code
None
Function
3-Position Spring Centered
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
