These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
24 VDC
Indicator Lights
Yes
Solenoid Indicator Lights Code
L
Coil Type Code
F
Solenoid Energization Code
None
NFPA Size
D03
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Actuator Type
Solenoid
Solenoid
Double
Spool Code
0
Port T Code
7
Response Type
Standard Response
EN Code
None
Housing Code
W
Center Position
All Ports Open
Spool Shift Timing
N/A
Solenoid Code
H
Electrical Connector Code
PA5
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
0
Seal Material
Buna-N
Overrides
No Overrides
Electrical Connection
Five Pin Connector
Function
3-Position Spring Centered
Port Restrictor Plugs
None
Pilot Valve Type
N/A
Coil Rating Code
H
Design No.
60
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Crossover
All Ports Open
Spool Spring Arrangement Code
C
AC/DC
DC
Reducer Module
N/A
Valve Type
High-Performance
Mechanical Options
None
Electrical Options
None
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Port Restrictor Plug Code
None
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
