These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
F
Solenoid
Double
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Electrical Connection
Wired Terminal Block
Crossover
All Ports Blocked
Electrical Options
None
Coil Rating Code
BL
Valve Type
High-Performance
Response Type
Standard Response
Port T Code
6
Function Code
2
AC/DC
AC
Surge Suppressor/Damper
None
Reducer Module
N/A
Solenoid Energization Code
None
Operation
Solenoid Operated
Spool Code
2
Solenoid Indicator Lights Code
None
Electrical Connector Code
T
Spool Spring Arrangement Code
C
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Housing Code
W
Port Restrictor Plug Code
None
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Indicator Lights
No
Seal Material
Buna-N
NFPA Size
D03
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Mechanical Options
None
Solenoid Code
BL
EN Code
None
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Design No.
60
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Port T Pressure Rating
3000 psi
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back