These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Solenoid Code
BL
Operation
Solenoid Operated
Mechanical Options
None
Pilot Valve Type
N/A
Port T Pressure Rating
3000 psi
Crossover
All Ports Blocked
Spool Indicator Switch Code
None
Electrical Options
None
Manual Override Option Code
None
Electrical Connection
Wired Terminal Block
Function Code
2
Reducer Module
N/A
Solenoid Indicator Lights Code
None
AC/DC
AC
Valve Type
High-Performance
Seal Material
Buna-N
Spool Spring Arrangement Code
C
Center Position
All Ports Blocked
Port Restrictor Plug Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Actuator Type
Solenoid
Coil Rating Code
BL
EN Code
None
Design No.
60
Solenoid Energization Code
None
NFPA Size
D03
Housing Code
W
Port Restrictor Plugs
None
Response Type
Standard Response
Indicator Lights
No
Pilot/Drain
None
Port T Code
6
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Rated Flow [Max]
21 gal/min
Electrical Connector Code
T
Solenoid
Double
Overrides
No Overrides
Function
3-Position Spring Centered
Spool Shift Timing
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Coil Type Code
F
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back