These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
S5
Solenoid
Single
Function Code
2
Coil Rating Code
B
Coil Type Code
F
Reducer Module
N/A
Port T Pressure Rating
150 psi
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
A
Pilot/Drain
None
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Response Type
Standard Response
Center Position
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Solenoid Code
B
NFPA Size
D03
Electrical Connector Code
T
Solenoid Energization Code
None
Indicator Lights
Yes
Valve Type
High-Performance
Design No.
60
Seal Material
Buna-N
Voltage & Frequency
110/120 VAC – 50/60 Hz
Overrides
No Overrides
Mechanical Options
None
Function
2-Position Spring Offset, End to End
Electrical Options
None
Manual Override Option Code
None
Spool Code
2
Port T Code
2
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
EN Code
None
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Crossover
All Ports Blocked
Spool Shift Timing
N/A
Operation
Solenoid Operated
Solenoid Indicator Lights Code
L
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
AC/DC
AC
Electrical Connection
Wired Terminal Block
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Housing Code
W
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back