These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
NFPA Size
D03
Mechanical Options
None
Cycle Rate [Max]
N/A
Port T Code
2
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Valve Type
High-Performance
Housing Code
W
Indicator Lights
Yes
Coil Type Code
F
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Response Type
Standard Response
EN Code
None
Electrical Connector Code
T
Spool Spring Arrangement Code
A
Spool Indicator Switch Code
S5
Function
2-Position Spring Offset, End to End
Rated Flow [Max]
21 gal/min
AC/DC
AC
Pilot Valve Type
N/A
Operation
Solenoid Operated
Solenoid Code
B
Coil Rating Code
B
Actuator Type
Solenoid
Reducer Module
N/A
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
L
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper
None
Electrical Connection
Wired Terminal Block
Electrical Options
None
Port Restrictor Plug Code
None
Solenoid Energization Code
None
Port Restrictor Plugs
None
Solenoid
Single
Function Code
2
Center Position
All Ports Blocked
Pilot/Drain
None
Port T Pressure Rating
150 psi
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Code
2
Manual Override Option Code
None
Overrides
No Overrides
Crossover
All Ports Blocked
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back