Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Intermediate Stroke | N/A |
| Cylinder Seal Material | Buna-N |
| Temperature Range [Min] | 0 °F |
| Shock Absorbers - Slide | No Shock Absorber |
| Slide Orientation | Right Hand (Standard) |
| Proximity Sensor | No Proximity Sensor |
| Positions | 2 Position |
| Temperature Range [Max] | 165 °F |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Cushions - Slide | No Cushions |
| Port Location | Standard (Position 1) |
| Cylinder Bore Size | 1.5 in |
| Support Rod Diameter | 20 mm |
| Pressure [Max] | 150 psi |
| Base Wt. | 8.86 lb |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Support Rod Material | Stainless Steel |
| Port Type | NPTF |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Slide Type | Thrust Slide |
| Flow Controls | w/o Flow Controls |
| Series | HBT |
| Proximity Sensor Code | None |
| Slide Configuration Option Code | B |
| Weight per Inch | 0.48 lb |
| Stroke | 8 in |
| Port Size | 1/4 |
| Bumpers - Slide | Bumpers (Both Ends) |
| Weight | 12.7 LB |
