Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Stainless Steel Rails
- Composite Bearing w/Contaminant Tolerant Seals
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Support Rod Material | Stainless Steel |
| Bumpers - Slide | Bumpers (Both Ends) |
| Cushions - Slide | No Cushions |
| Port Size | 1/4 |
| Port Type | NPTF |
| Slide Orientation | Right Hand (Standard) |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Proximity Sensor Code | None |
| Weight per Inch | 0.48 lb |
| Series | HBT |
| Cylinder Bore Size | 1.5 in |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Pressure [Max] | 150 psi |
| Cylinder Seal Material | Buna-N |
| Shock Absorbers - Slide | No Shock Absorber |
| Bearing Type | Composite Bearing w/Contaminant Tolerant Seals |
| Base Wt. | 8.86 lb |
| Slide Type | Thrust Slide |
| Stroke | 8 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Location | Standard (Position 1) |
| Intermediate Stroke | N/A |
| Support Rod Diameter | 20 mm |
| Temperature Range [Max] | 165 °F |
| Positions | 2 Position |
| Flow Controls | w/o Flow Controls |
| Proximity Sensor | No Proximity Sensor |
| Slide Configuration Option Code | B |
| Temperature Range [Min] | 0 °F |
| Weight | 12.7 LB |
