6210ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761326

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Inner Ring Width	20 mm
Limiting Speed - Grease	7100 rpm
Dynamic Load Rating	8,262.00 lbf
Lubricant	Mul-Temp SRL
Inch/Metric	Metric Bore
Cage Material	Pressed Steel
Preload Level	None
I.D.	50 mm
Radial Internal Clearance	C3
Limiting Speed - Oil	8500 rpm
Bore Type	Round Bore
Ball Material	Steel
Precision Level	Standard (ABEC 1)
O.D.	90.0000 mm
O.D. Type	Straight
Material	Steel
Precision	Standard
No. in Set	Single Bearing
Corner Radius [Min]	1.10 mm
Cage Type	Metal
Enclosure	Double Shielded
Contact Angle	0°
Bearing Type	Radial
Width	20 mm
Capacity	Standard Capacity
Locking Device	No Locking Device
Radial Internal Clearance Specification	Greater Than Normal Clearance
Seal Material	Metal
Rows of Balls	Single
Snap Ring	No Snap Ring
icNumber	7695906
Outer Ring Width	20 mm
Static Load Rating [Max]	5,220.00 lbf
Seal Type	Non-Contact Seals
Weight	1.06 LB
EAN or UPC	29176015076