6210ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761326

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Radial Internal Clearance Specification	Greater Than Normal Clearance
Seal Type	Non-Contact Seals
Cage Material	Pressed Steel
Inner Ring Width	20 mm
Ball Material	Steel
Preload Level	None
Precision Level	Standard (ABEC 1)
Seal Material	Metal
Dynamic Load Rating	8,262.00 lbf
Contact Angle	0°
No. in Set	Single Bearing
Enclosure	Double Shielded
Capacity	Standard Capacity
Bore Type	Round Bore
Material	Steel
I.D.	50 mm
Outer Ring Width	20 mm
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
Rows of Balls	Single
Cage Type	Metal
O.D.	90.0000 mm
icNumber	7695906
Bearing Type	Radial
Static Load Rating [Max]	5,220.00 lbf
Width	20 mm
Radial Internal Clearance	C3
Limiting Speed - Grease	7100 rpm
Lubricant	Mul-Temp SRL
O.D. Type	Straight
Precision	Standard
Corner Radius [Min]	1.10 mm
Limiting Speed - Oil	8500 rpm
Locking Device	No Locking Device
Weight	1.06 LB
EAN or UPC	29176015076