
- 65 mm ID x 120 mm OD x 23 mm Wide
- Double Shielded
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity filling-notch bearings
caution
- Maintain 5 to 8 Nm (4 to 6 ft lb) maximum torque on valve tube nut
- over-tightening may cause failure
Bearing Type | Radial |
Radial Internal Clearance Specification | Normal Clearance |
Width | 23.000 mm |
O.D. | 120 mm |
Rows of Balls | Single |
Inch/Metric | Metric Bore |
I.D. | 65 mm |
No. in Set | Single Bearing |
Contact Angle | 0° |
Inner Ring Width | 23 mm |
Snap Ring | No Snap Ring |
Series | 62 |
Seal Material | Metal |
Ball Material | Steel |
Enclosure | Double Shielded |
Lubricant | Polyurea Base |
Temperature Range [Min] | -22 °F |
Fillet Radius | 1.5 mm |
Origin | Single Row Radial |
Material | Steel |
Preload Level | None |
Outer Ring Width | 23 mm |
Limiting Speed - Grease | 4300 rpm |
Precision | Standard |
Cage Material | Steel |
Bore Type | Round Bore |
O.D. Type | Straight |
Seal Type | Non-Contact Seals |
Precision Level | Standard (ABEC 1) |
Locking Device | No Locking Device |
icNumber | 7697936 |
Cage Type | Metal |
Static Load Rating [Max] | 14700 lbf |
Capacity | Maximum Capacity |
Radial Internal Clearance | Normal |
Limiting Speed - Oil | 5300 rpm |
Dynamic Load Rating | 15600 lbf |
Temperature Range [Max] | 250 °F |
Weight | 2.498 LB |
EAN or UPC | 97741005142 |
