
- 65 mm ID x 120 mm OD x 23 mm Wide
- Double Shielded
- No Snap Ring
- Single Row Radial Steel Bearing
applications
- Used in applications with heavy radial loads or a combination of radial and thrust loads where the radial load is predominant
features
- Maximum radial load-carrying capacity
- Ability to carry heavy combined radial and thrust loads
- Designated as the notched type because it has a filling notch on one side of the inner and outer rings
- Normally furnished with ABMA CO radial clearance
- Type and material available is a two-piece, pressed steel, ball riding, stayrod cage
- Single-row maximum capacity filling-notch bearings
caution
- Maintain 5 to 8 Nm (4 to 6 ft lb) maximum torque on valve tube nut
- over-tightening may cause failure
Cage Type | Metal |
Preload Level | None |
Outer Ring Width | 23 mm |
Precision | Standard |
Bore Type | Round Bore |
Limiting Speed - Grease | 4300 rpm |
Radial Internal Clearance | Normal |
Dynamic Load Rating | 15600 lbf |
Material | Steel |
Enclosure | Double Shielded |
Width | 23.000 mm |
Inner Ring Width | 23 mm |
icNumber | 7697936 |
Rows of Balls | Single |
Limiting Speed - Oil | 5300 rpm |
Seal Material | Metal |
Seal Type | Non-Contact Seals |
Capacity | Maximum Capacity |
Precision Level | Standard (ABEC 1) |
Contact Angle | 0° |
O.D. | 120 mm |
Temperature Range [Min] | -22 °F |
Fillet Radius | 1.5 mm |
I.D. | 65 mm |
Lubricant | Polyurea Base |
Bearing Type | Radial |
Ball Material | Steel |
Radial Internal Clearance Specification | Normal Clearance |
Cage Material | Steel |
Origin | Single Row Radial |
Inch/Metric | Metric Bore |
O.D. Type | Straight |
Snap Ring | No Snap Ring |
Temperature Range [Max] | 250 °F |
Series | 62 |
Locking Device | No Locking Device |
Static Load Rating [Max] | 14700 lbf |
No. in Set | Single Bearing |
Weight | 2.498 LB |
EAN or UPC | 97741005142 |
