Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Width | 1.5 in |
| Outside Dia. | 9.495 in |
| Type | C |
| Belt Pitch | 0.5 in |
| Hub Dia. | 6 1/4 in |
| Finished Bore | N/A |
| Belt Size | H |
| Width Across Teeth | 1.813 in |
| Material | Cast Iron |
| Bore Type | Bushed |
| No. of Teeth | 60 |
| Bushing Type | Taper-Lock |
| Length Through Bore | 2 in |
| Pitch Diameter | 9.549 in |
| Hub Type | A |
| Bore Range [Max] | 3 in |
| Bushing Series | 3020 |
| Bore Range [Min] | 0.875 in |
| Weight | 24.8 LB |
| EAN or UPC | 697950084039 |
