Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | H |
| Hub Type | A |
| Hub Dia. | 6 1/4 in |
| Pitch Diameter | 9.549 in |
| Bore Range [Min] | 0.875 in |
| No. of Teeth | 60 |
| Bore Range [Max] | 3 in |
| Type | C |
| Belt Width | 1.5 in |
| Belt Pitch | 0.5 in |
| Material | Cast Iron |
| Width Across Teeth | 1.813 in |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Bushing Series | 3020 |
| Bore Type | Bushed |
| Outside Dia. | 9.495 in |
| Length Through Bore | 2 in |
| Weight | 24.8 LB |
| EAN or UPC | 697950084039 |
