Find a Service Center
- Self-Centering Style
- SLD 2600 Type
- 25 mm Inside Diameter
- 50 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Standard, QD-style HTD sprockets may not have the torque capacity for the higher rated HT150 belts.
| O.D. | 50 mm |
| Torque | 12.5 in lb |
| Screw Material | Steel |
| Set Screw Size | M6 |
| Style | Self-Centering |
| Shaft Tolerance | -0.0013 in |
| Type | SLD 2600 |
| Hub Bore Tolerance | 0.0018 in |
| Inch/Metric | Metric |
| Collar Width | 45 mm |
| Pressure on the Shaft | 25284 psi |
| Material | Silver/Metallic |
| Screw Style | Socket Head Cap Screw |
| Contact Length | 41 mm |
| Mountable Thickness | 51 mm |
| Screw Tightening Torque | 12.5 lb/ft |
| Thickness | 45 mm |
| Pressure on the Hub | 12026 psi |
| Transmitted Torque (Max) | 532 lb/ft |
| I.D. | 25 mm |
| No. of Screws | 6 |
| Locking Type | Internal Locking |
| Transmitted Axial Force | 12965 lb/ft |
| Total Width @ Relaxed State | 51 mm |
| Weight | 1.036 LB |
| EAN or UPC | 697904979305 |
