Find a Service Center
- Self-Centering Style
- SLD 2600 Type
- 25 mm Inside Diameter
- 50 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Standard, QD-style HTD sprockets may not have the torque capacity for the higher rated HT150 belts.
| Transmitted Torque (Max) | 532 lb/ft |
| Screw Material | Steel |
| Collar Width | 45 mm |
| Pressure on the Hub | 12026 psi |
| Mountable Thickness | 51 mm |
| Hub Bore Tolerance | 0.0018 in |
| O.D. | 50 mm |
| I.D. | 25 mm |
| Contact Length | 41 mm |
| Set Screw Size | M6 |
| Screw Style | Socket Head Cap Screw |
| Transmitted Axial Force | 12965 lb/ft |
| Total Width @ Relaxed State | 51 mm |
| No. of Screws | 6 |
| Inch/Metric | Metric |
| Locking Type | Internal Locking |
| Thickness | 45 mm |
| Screw Tightening Torque | 12.5 lb/ft |
| Type | SLD 2600 |
| Shaft Tolerance | -0.0013 in |
| Torque | 12.5 in lb |
| Style | Self-Centering |
| Material | Silver/Metallic |
| Pressure on the Shaft | 25284 psi |
| Weight | 1.036 LB |
| EAN or UPC | 697904979305 |
