Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Open Width | 3/8 in |
| Precision Level | Standard (ABEC 1) |
| Width | 1/2 in |
| Ball Material | Steel |
| Seal Type | Non-Contact Seals |
| Inner Ring Width | 1/2 in |
| Temperature Range [Min] | -30 °F |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 2,500.00 lbf |
| Cage Material | Steel |
| I.D. | 7/8 in |
| Rows of Balls | Single |
| Cage Type | Metal |
| Precision | Standard |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. Type | Straight |
| O.D. | 1 7/8 in |
| Material | Steel |
| Fillet Radius | 0.031 in |
| Enclosure | Double Shielded |
| Preload Level | None |
| Seal Material | Metal |
| Outer Ring Width | 1/2 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Closed Width | 1/2 in |
| icNumber | 7696983 |
| Temperature Range [Max] | 275 °F |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Inch/Metric | Inch Bore |
| Contact Angle | 0° |
| Weight | 0.29 LB |
| EAN or UPC | 87796044807 |
| NSN Number | 3110-00-155-8883 |
