Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 11/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Utilities
- Chemical
- General industrial
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Cage Type | Metal |
| Bearing Type | Radial |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Locking Device | No Locking Device |
| Inch/Metric | Inch Bore |
| Temperature Range [Max] | 275 °F |
| Inner Ring Width | 11/32 in |
| Dynamic Load Rating | 1,700.00 lbf |
| I.D. | 5/8 in |
| Open Width | 9/32 in |
| Seal Type | Contact Seals |
| Ball Material | Steel |
| Width | 11/32 in |
| Seal Material | Buna-N |
| Temperature Range [Min] | -30 °F |
| Cage Material | Steel |
| icNumber | 7696518 |
| Outer Ring Width | 11/32 in |
| Capacity | Standard Capacity |
| O.D. | 1 3/8 in |
| Static Load Rating [Max] | 682.00 lbf |
| Origin | Single Row Radial |
| Closed Width | 11/32 in |
| Material | Steel |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Precision | Standard |
| Fillet Radius | 0.031 in |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Double Sealed |
| No. in Set | Single Bearing |
| Weight | 0.088 LB |
| EAN or UPC | 87796044746 |
