Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Enclosure | Open |
| Bearing Type | Radial |
| Ball Material | Steel |
| Contact Angle | 0° |
| Precision | Standard |
| Inner Ring Width | 7/32 in |
| Open Width | 7/32 in |
| Origin | Single Row Radial |
| Preload Level | None |
| Bore Type | Round Bore |
| Cage Material | Steel |
| Closed Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Outer Ring Width | 7/32 in |
| Snap Ring | No Snap Ring |
| I.D. | 3/8 in |
| Static Load Rating [Max] | 312.00 lbf |
| Fillet Radius | 0.016 in |
| Inch/Metric | Inch Bore |
| icNumber | 7696812 |
| O.D. | 7/8 in |
| No. in Set | Single Bearing |
| Material | Steel |
| Pre Lubricant | None |
| Radial Internal Clearance | C3 |
| Width | 7/32 in |
| Capacity | Standard Capacity |
| Seal Type | Unsealed |
| Rows of Balls | Single |
| Dynamic Load Rating | 830.00 lbf |
| Lubricant | Oil Preservative |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Seal Material | None |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.17 LB |
| EAN or UPC | 87796044203 |
| NSN Number | 3110-00-516-5413 |
