Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Precision | Standard |
| Outer Ring Width | 7/32 in |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Preload Level | None |
| Fillet Radius | 0.016 in |
| Inch/Metric | Inch Bore |
| Open Width | 7/32 in |
| Material | Steel |
| Bore Type | Round Bore |
| Pre Lubricant | None |
| icNumber | 7696812 |
| Ball Material | Steel |
| Width | 7/32 in |
| Cage Type | Metal |
| O.D. Type | Straight |
| Origin | Single Row Radial |
| Seal Type | Unsealed |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Open |
| Dynamic Load Rating | 830.00 lbf |
| Seal Material | None |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 312.00 lbf |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Contact Angle | 0° |
| I.D. | 3/8 in |
| Inner Ring Width | 7/32 in |
| Closed Width | 9/32 in |
| O.D. | 7/8 in |
| Weight | 0.17 LB |
| EAN or UPC | 87796044203 |
| NSN Number | 3110-00-516-5413 |
