Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.625" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Temperature Range [Min] | -30 °F |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| icNumber | 7696114 |
| Seal Material | Buna-N |
| Locking Device | No Locking Device |
| Enclosure | Double Sealed |
| Preload Level | None |
| Contact Angle | 0° |
| Material | Steel |
| Outer Ring Width | 0.196 in |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 125.00 lbf |
| Fillet Radius | 0.012 in |
| I.D. | 1/4 in |
| Cage Type | Metal |
| Open Width | 0.196 in |
| Snap Ring | No Snap Ring |
| Cage Material | Steel |
| Bore Type | Round Bore |
| Temperature Range [Max] | 275 °F |
| Precision | Standard |
| Closed Width | 0.196 in |
| Origin | Single Row Radial |
| Inner Ring Width | 0.196 in |
| Seal Type | Contact Seals |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Material | Steel |
| Dynamic Load Rating | 365.00 lbf |
| O.D. | 5/8 in |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| Width | 0.196 in |
| Weight | 0.022 LB |
| EAN or UPC | 87796044173 |
