Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Closed Width | 1/2 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 2,500.00 lbf |
| Inner Ring Width | 1/2 in |
| Width | 1/2 in |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| I.D. | 1 in |
| No. in Set | Single Bearing |
| Open Width | 3/8 in |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| Seal Type | Contact Seals |
| Contact Angle | 0° |
| Enclosure | Double Sealed |
| O.D. | 2 in |
| Rows of Balls | Single |
| Outer Ring Width | 1/2 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Cage Material | Steel |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| Precision | Standard |
| Temperature Range [Min] | -30 °F |
| Bearing Type | Radial |
| Preload Level | None |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| icNumber | 7697034 |
| Material | Steel |
| Fillet Radius | 0.031 in |
| Seal Material | Buna-N |
| Weight | 0.198 LB |
| EAN or UPC | 87796044845 |
| NSN Number | 3110-00-259-0948 |
