Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Inch/Metric | Inch |
| Seal Type | Labyrinth Seals |
| Housing Construction | 1 Piece |
| End Type | Open End |
| Housing Width | 8 in |
| Bearing Type | Ball Bearing |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | GN215KRRB |
| Housing Height | 8 9/16 in |
| Mounted Unit Duty | Heavy-Duty |
| Lubrication | Relubricatable |
| Bolt Hole Width | 1 3/8 in |
| Collar No. | SN215K |
| Series | LSAO Series |
| Base Width | 4 3/8 in |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Bolt Hole Length | 1 in |
| Base Height | 1 7/8 in |
| Overall Width | 4 3/8 in |
| Temperature Range [Max] | 350 °F |
| Length Through Bore | 3.9375 in |
| Bolt Hole Spacing | 12 3/8 in |
| Bolt Size | 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Base Length | 15 3/8 in |
| Collar O.D. | 4 7/16 in |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Shaft Dia. | 2.9375 in |
| Weight | 44.24 LB |
| EAN or UPC | 87796061880 |
