Find a Service Center
- 1.9375" Shaft, 3.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Labyrinth Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Locking Device | Eccentric Locking Collar |
| Bearing Design | Non-Expansion |
| Base Length | 11 3/8 in |
| Bearing Type | Ball Bearing |
| Seal Type | Labyrinth Seals |
| Base Height | 1 5/16 in |
| Bolt Hole Width | 3/4 in |
| Bolt Hole Spacing | 9 in |
| Bearing Insert | GN115KLLB |
| Collar No. | SN115K |
| Insert Type | Steel Insert |
| End Type | Open End |
| Shaft Dia. | 1.9375 in |
| Lubrication | Relubricatable |
| Housing Material | Cast Iron |
| Inch/Metric | Inch |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 3 1/8 in |
| Bolt Holes | 2 |
| Temperature Range [Max] | 350 °F |
| Bolt Hole Length | 1 1/8 in |
| Housing Construction | 1 Piece |
| Weight | 16.896 LB |
| EAN or UPC | 87796060555 |
