Find a Service Center
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 0° |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| Locking Device | No Locking Device |
| Temperature Range [Min] | -30 °F |
| Radial Internal Clearance | C3 |
| Seal Type | Contact Seals |
| Precision | Standard |
| Seal Material | Buna-N |
| Fillet Radius | 0.012 in |
| Closed Width | 0.196 in |
| Open Width | 5/32 in |
| icNumber | 7696113 |
| Static Load Rating [Max] | 110.00 lbf |
| Lubricant | Polyurea Base |
| Dynamic Load Rating | 325.00 lbf |
| Origin | Single Row Radial |
| Material | Steel |
| Cage Type | Metal |
| I.D. | 3/16 in |
| Cage Material | Steel |
| O.D. Type | Straight |
| Outer Ring Width | 0.196 in |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| Width | 0.196 in |
| Enclosure | Double Sealed |
| Ball Material | Steel |
| O.D. | 1/2 in |
| Inner Ring Width | 0.196 in |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Weight | 0.022 LB |
| EAN or UPC | 87796044470 |
| NSN Number | 3110-00-580-4046 |
