Find a Service Center
- Single Row Radial Bearing, 0.876" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Bearing Type | Radial |
| Outer Ring Width | 0.591 in |
| Inner Ring Width | 1 in |
| Capacity | Standard Capacity |
| Material | Steel |
| Cage Material | Steel |
| I.D. | 7/8 in |
| Temperature Range [Max] | 275 °F |
| Enclosure | Double Sealed |
| O.D. | 2.04724 in |
| Bore Type | Hex Bore |
| Contact Angle | 0° |
| Ball Material | Steel |
| Preload Level | None |
| Temperature Range [Min] | -30 °F |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Polyurea Base |
| O.D. Type | Spherical |
| Ball Dia. | 0.313 in |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 1560 lbf |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 3450 lbf |
| Radial Internal Clearance | C3 |
| No. of Balls | 9 |
| Seal Material | Rubber |
| Inch/Metric | Inch Bore |
| Precision | Standard |
| Cage Type | Metal |
| Seal Type | Contact Seals |
| Locking Device | No Locking Device |
| Origin | Wide Inner Ring |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| Weight | 0.441 LB |
| EAN or UPC | 87796045972 |
