Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Hardware Code | 00 |
| Series | H Series |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 469 rpm |
| Mounting Hole Size | 0.565 in |
| Port Type | SAE O-Ring |
| Special Features Assembly Code | 0 |
| Displacement (in³/rev) | 7.32 |
| Port Code | A |
| Special Features | None |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.187 in |
| RPM [Max] | 469 rpm |
| Flange Orientation | Standard |
| Splines | 0 |
| Flow Rate | 14 gal/min |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 1 |
| Weight | 12.67 LB |
