Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| RPM [Max] | 469 rpm |
| Bolt Circle Dia. | 4.187 in |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Case Drain Code | 1 |
| Port Location | Side Port |
| Special Features | None |
| Displacement (in³/rev) | 7.32 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Port Type | SAE O-Ring |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Special Features Hardware Code | 00 |
| RPM [Min] | 469 rpm |
| Mounting Type Code | A |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Port Code | A |
| Flange Orientation | Standard |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Mounting Hole Size | 0.565 in |
| Port Size & Location | SAE-10 Side |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Paint Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Flow Rate | 14 gal/min |
| Output Shaft Code | 01 |
| Duty | Standard-Duty |
| Weight | 12.67 LB |
